5
177
Starting and Driving
shall be shown in the main menu when
CORSA mode is selected only. When
the user switches it on, it lights up in an
amber colour.
Suspensions Menu
In this menu user can switch the
suspensions stiffness by rotating the
drive mode selector (no touch interaction
for suspensions) between the three
suspensions setting modes: SOFT, MID
and HARD. The stiffness setting order
shall be SOFT - MID for WET, GT and
SPORT and MID - HARD for CORSA
mode.
NOTE:
A different drive mode can be set even
with engine running and vehicle in
motion.
Setting the Drive Mode
When in main content menu, drive
modes can be set using the selector
on central tunnel turning the knob
clockwise or counterclockwise returning
on its initial mechanical stable position
when released.
Selected mode lasts until changed or
until key off. At key on default "GT" mode
is always the predominant mode.
NOTE:
If a failure occurs, the suspensions menu
shall be greyed out and not interactable.
To activate a drive mode, switch the
selector as indicated below. The set
drive mode screen will be displayed.
GT Mode
At key on, "GT" mode is always
the predominant mode. This is the
visualization on the cluster display and
on the drive mode selector:
Each time GT Mode is set, suspensions
are automatically set in "SOFT" trim.
Swiping left on the suspension menu,
the user can rotate the knob clockwise
or counterclockwise to switch them
in "MID" trim. An amber telltale will be
displayed on the instrument cluster.
NOTE:
• GT Mode is selectable at every key on
or switching the drive mode selector
from WET rotating the knob once
(Continued)
To Next Page
Loading...
