5
191
Starting and Driving
approximately 9.3 MPH (15 km/h) or
above.
Park Assist Sensors
The four Park Assist sensors, located in
the rear bumper, monitor the area behind
the vehicle that is within the sensor's
field of view. The sensors can detect
obstacles from the rear bumper in the
horizontal direction, depending on the
location, type and orientation of the
obstacle.
The four Park Assist sensors, located
in the front bumper, monitor the area
in front of the vehicle that is within the
sensor's field of view.
The sensors can detect obstacles from
the front bumper in the horizontal
direction, depending on the location,
type and orientation of the obstacle.
Park Assist Warning Messages
Display
The Park Assist warning screen will only
be displayed if "Sound + Display" is
selected from the MIA system.
Refer to "Functions of Settings Menu on
MIA" in section "Dashboard Instruments
and Controls" for further information. The
Park Assist warning screen is located on
the instrument cluster display.
It provides visual warnings to indicate
the distance between the rear bumper
and/or front bumper and the detected
obstacle.
The warning display will turn on
indicating the system status (ready or
off) when the vehicle is in R (Reverse) or
in D (Drive) mode and an obstacle has
been detected.
The detection area in front of the vehicle
is divided into three parts with four arcs
in the middle one and two arcs in the
lateral one; while the three detection
areas behind the car into six arcs in the
middle one and two arcs in the lateral
ones.
The system will indicate a detected
obstacle by displaying arcs with fixed or
flashing light and a characteristic sound
according to the obstacle distance. The
color indicates the distance and the arc
indicates the position of the detected
obstacle. The green color of the outer
arc indicates the maximum distance, the
amber color of the middle arcs indicates
the medium distance, while the red color
of the nearest arc indicates the minimum
distance.
To Next Page
Loading...
