Maserati MC20 2023 - Page 250

7
248
Maintenance and Care
On the MC20 model, open the rear hood
to check the coolant level.
MC20
On the MC20 Cielo model, open the
service compartment using the soft-key
on the MIA screen (see "Functions
of My Car Menu on MIA" in section
"Instruments and Controls" for further
information.) and remove the central
trap-door.
MC20 Cielo
• When additional engine coolant
(antifreeze) is needed to maintain the
proper level, it should be added to the
coolant reservoir after removing the
cap; for the MC20 Cielo model, remove
the left trap-door to reach the cap. Do
not overfill.
• Once the desired level is reached,
firmly close cap of the reservoir.
• If frequent engine coolant (antifreeze)
additions are required, or if the level
in the coolant recovery reservoir does
not drop when the engine cools, the
cooling system should be pressure
tested for leaks by an Authorized
Maserati Dealer.
• Keep the front of the radiator and the
condenser clean.
WARNING!
•
Never add engine coolant (antifreeze)
when the engine is hot. Do not loosen
or remove the cap of the engine
coolant reservoir to cool a hot engine.
Heat causes pressure to build up in the
cooling system. To prevent scalding
or injury, do not remove the pressure
cap while the system is hot or under
pressure.
•
When adding coolant do not use
a pressure cap other than the one
specified for your vehicle. Personal
injury or engine damage may result.
CAUTION!
Do not pour coolant on the engine to
avoid the malfunction of the ignition
system.
Brake Fluid Level Check
Check the fluid level immediately
if the brake system warning light
(United States market) or
(Canadian market) and the related
message turn on indicating a low level of
brake fluid.
• Remove the brakes fluid reservoir
access cover.
• Clean the top of the master cylinder
area before removing the cap.
• Add fluid to bring the level up to
the "MAX" mark on the side of the
master cylinder reservoir. Use only