4
130
External lights and direction indicators
Direction indicators
The lever has 3 settings:
B - Direction indicators off
C - Lever up: right-hand indicators
D - Lever down: left-hand indicators.
Lane change function
This function allows you to activate
either the right-hand or left-hand
direction indicators so that they flash
three times, without moving the lever
to positions C or D, and then move it
back to the neutral position, B.
To activate this function, you must
simply start moving the lever to a
different position: if you move it up
you activate the right-hand direction
indicators, if you move it down you
activate the left-hand direction
indicators.
This function is useful when
overtaking or changing lanes.
High beams
To switch on the high beams with the
light switch in position 2, push the left
hand lever towards the dashboard.
Pull the lever towards the steering
wheel again to switch off the high
beams and switch on the low beams.
WARNING: For the use of the high
beams, follow local legislation.
Flashing the headlights
The headlights can be flashed by
pulling the left-hand lever towards the
steering wheel.
Flashing occurs also with lights off if
the ignition key is at MAR (ON).
WARNING: Flashing takes place with
the high beams. Comply with local law
in force to avoid penalties.
B
C
D
M139_UM_usa1.book Page 130 Monday, September 1, 2008 2:39 PM
To Next Page
Loading...
