6
202
If an interior light goes out
If an interior light goes
out
WARNING: Before replacing a bulb,
ensure that the matching fuse is intact.
For replacement, use only original,
new light bulbs having the same
characteristics as the bulb to be
replaced.
Front and rear dome light
To replace the bulbs:
1) Use a screwdriver to gently pry it out
at points A and remove the dome
light.
2) Replace the bulb concerned by
rotating it:
– timed light B
– reading lights C.
3) Refit the dome lamp inserting first
the front side and the pushing the
rear side into its seat.
WARNING: When refitting the dome
light, make sure that the electric wires
are correctly positioned and do not
interfere with the dome light edges
and with the retaining tabs.
Courtesy mirror light
To replace the bulb (12V - 5W
“torpedo” type):
1) Remove the fixing frame by prying it
out gently at points D.
2) Replace the bulb.
3) Refit the frame by pressing it.
A A
C
B
D
D
M139_UM_usa1.book Page 202 Monday, September 1, 2008 2:39 PM
To Next Page
Loading...
