3
86
Controls
Roof controls
Deactivating the alarm system
motion sensors
Pressing button U will deactivate the
alarm motion sensing system. When
this function is deactivated, the LED on
the button will flash for 3 seconds and
then will turn off.
Deactivating the anti-lift alarm
system
Pressing button V will deactivate the
anti-lift alarm system. When this
function is deactivated, the LED on the
button will flash for 3 seconds and
then turn off.
Tire calibration button
To calibrate the system, with the
ignition key in position MAR (ON),
press button W for a time ranging
from 4 to 10 seconds.
The system will take a maximum of 20
minutes to complete the calibration
procedure with the vehicle in motion.
The detected situation will then be
shown on the display.
For further information, see the “Tire
pressure monitoring system” on
page 47.
V U W
M139_UM_usa1.book Page 86 Monday, September 1, 2008 2:39 PM
To Next Page
Loading...
