1. Pull out the crown to rst click.
2. Turn the crown clockwise or counterclockwise (de-
pending on the model) until the correct date ap-
pears. Do not set the date between 9.00 PM and 1.00
AM. Otherwise, the day may not change correctly.
If it is necessary to set the date during that time period, rst
set the watch at a time that is not included between 9.00
PM and 1.00 AM, set the date, and then set the correct time.
3. When the second hand is at 12, pull out the crown to the
second click. The second hand will stop. Set the hour
and minutes by turning the crown.
4. Return the crown to its original position.
To Next Page
Loading...