Need help?Do you have a question about the Masibus Automation And Instrumentation 8204 and is the answer not in the manual?
General| Input Channels | 4 |
|---|---|
| Power Supply | 24 VDC |
| Mounting | Panel Mount |
| Operating Temperature | 0 to 50°C |
| Enclosure Rating | IP20 |
| Input Type | RTD, Thermocouple, Voltage, Current |
| Display | LED |
| Communication | RS485 |
| Measurement Range | Depends on input type |
| Accuracy | ±0.1% of FS |
| Output | Relay |
| Relative Humidity | 20 to 90% RH (Non-condensing) |
Steps for physically mounting and installing the controller.
Guidelines for safely connecting input, output, and power wires.
Description of buttons, LEDs, and display elements on the front.
Diagram and identification of all terminal connections on the back panel.
Functions of the Menu/Enter and Escape keys for navigation.
Usage of Increment and Shift/Decrement keys for setting values.
Settings for basic parameters like password and setpoints.
Advanced settings including input types and relay logic.
Configuration of relay behavior for alarms and trips.
Parameters accessible via holding registers for reading status.
Parameters accessible via input registers for reading setpoints and types.
To Next Page