Need help?Do you have a question about the Masibus GPS MASTER CLOCK MC-1-M and is the answer not in the manual?
Outlines the warranty period, coverage limitations, and exclusions for the manufactured product.
Lists standard and optional components included in the device package and available accessories.
Provides an overview of the GPS Master Clock's purpose and its role in industrial timing.
Explains the basics of satellite navigation systems and how they provide positioning.
Details timing accuracy, receiver input, tracking capabilities, and acquisition times.
Specifies the physical dimensions and layout of the GPS Master Clock unit.
Describes the LCD display, status LEDs, and keypad interface on the front panel.
Details the various input/output connectors and their functions on the rear panel.
Essential safety warnings and recommended practices for installing the device.
Procedures for selecting an antenna site, mounting, and cable connections.
Presents a comprehensive wiring diagram illustrating system connections and signal flow.
Instructions for changing internal jumper settings to configure device parameters.
Explains receiver boot-up states and the function of the battery backup system.
Describes the power-on sequence and normal operational states of the device.
Explains how to configure device parameters using the front panel keypad.
Guides on establishing serial communication using PC software like HyperTerminal.
Details various commands for configuring device parameters via serial interface.
Explains serial time frame outputs like NMEA, T-Format, and NGTS.
Details IRIG-B and IEEE 1344 time code generation and output capabilities.
Covers NTP output for time synchronization in Ethernet networks.
Describes the status indications via relay contacts and pulse outputs.
Explains remote configuration via Telnet and network monitoring using SNMP.
Explains how the device functions when GPS lock is temporarily lost.
Lists and describes optional input power supplies and output modules.
Guides on resolving power, time, serial communication, and GPS lock problems.
Addresses problems with Ethernet, Telnet, SNMP, and NTP synchronization.
Provides definitions for technical terms and abbreviations used throughout the manual.
To Next Page
General