WARNING.
Installation of all gas appliances MUST be carried out only by an
Authorised Installer.
The heater must be installed according to these instructions and in
compliance with all relevant building, gas-fitting, electrical and other
Statutory Regulations (e.g. AS 5601 (AG-601), NZS 5261). Any shortcomings
in the appliance and flue installation will be the responsibility of the
installer, and Masport Ltd will not be accountable for any such failings or
their consequences.
The guard is fitted to this appliance (Australia only) to reduce the risk of
fire or injury from burns and no part of it should be permanently removed.
For the protection of young children or the infirm, a secondary guard is
required.
These appliances must not be installed in mobile homes.
We recommend that you have your heater checked yearly by an Authorised
Technician.
BEFORE INSTALLATION COMMENCES, check the data plate on the rear of
the heater cabinet to verify that it is the correct type to suit your gas and
also that the gas consumption rate is correct for your application.
CONTENTS:-
Positioning the heater..........................2
Heater dimensions ...............................2
Minimum installation clearances........3
Installation
Shims...............................................3
Gas ...................................................3
Electricity ........................................4
Flue..................................................4
Seismic restraint .............................5
Test firing .........................................5, 6
Servicing...............................................7
Glass removal and assembly ......7, 8
Routine maintenance ...........................9
Fan wiring diagram .............................9
Trouble shooting...........................10, 11
Cleaning instructions.........................11
Operating instructions.......................12
THIS BOOK CONTAINS IMPORTANT INFORMATION.
PLEASE KEEP IT IN A SAFE PLACE FOR FUTURE REFERENCE.
1
To Next Page
Loading...
Need help?
General
