SPECIFICATIONS
MASSEY FERGUSON
®
1655
FRAMES AND AXLES
Rear Axle
Type Flange
Tread Settings: Min - Max, in (mm) 52.4 (1330)-60.2 (1530)
Rear Axle Capacity 4630 (2100)
4WD Front Axle
Steering Angle degrees 57
Drive Mechanical
Drive Shaft Shield Yes
Drive Ratio 1.62
Method of Engagement Mechanical Lever
Tread Settings in (mm) 54.5 (1385)
Front Axle Capacity lbs (kg) 4630 (2100)
THREE POINT HITCH / PTO / DRAWBAR
Three Point Hitch
ASAE Hitch Category 1
Number of Lift Cylinders 1
Controls RH Console
Type of Stabilizers Telescopic
Type of Link Ends Telescopic
Draft Sensing Optional
Lift Capacity @ 24 in: lb (kg) 3086 (1400)
Lift Capacity @ hitch point: in lb (kg) 3483 (1580)
Rear Power Take Off (PTO)
Type Independent
Speeds (rpm) 540
Control Instrument Panel
Disconnect Control LH Console
Clutch Wet multi Disc
Shaft Configuration 1.37 (35)
PTO Brake Yes
Mid PTO NA
Type
Speeds (rpm)
Control
Disconnect Control
Clutch
Shaft Configuration
PTO Brake
NOTE: Mid & Rear PTO can be operated simultaneously or independently
Drawbar
Type Fixed
Maximum Static Load lbs (kg) 880 (400)
310-4
To Next Page
Loading...