Front axle
Model MF 6713 S/MF 6714 S
MF 6715 S/MF 6716 S/MF 6718
S
Suspension ram diameter 68 mm x 32 mm
Suspension ram stroke 2 x 129 mm
Hydraulic control unit brand Husco
Hydraulic control unit nominal
pressure
190 bar
Number of accumulators 2
Accumulator pressure 10 bar and 50 bar
Suspension sensor type Angular potentiometer.
Steering sensor type Angular potentiometer.
Brake type Combined with the rear brake
Factor K 1.32
Spool valve
Model All models
System type Closed Center Load Sensing (CCLS)
Flow rate 110 l/190 l
High-pressure pump type Bosch Rexroth piston pump
High-pressure pump displacement 45 cm3 at 110 l/min
85 cm3 at 190 l/min
High-pressure pump rotational speed 2512 rpm
High-pressure pump maximum flow rate 110 l/min or 190 l/min
High-pressure pump maximum pressure 205 bar
Maximum quantity of oil 110 l
Maximum exportable oil quantity (without adding
oil)
42 l continuous
52 l temporary (example: emptying a bucket)
Charge pump type Suction
Main relief valve adjustment pressure 230 bar ± 5 bar
Number of spool valves (maximum) 8
Number of front "push-pull" connectors 4
Number of rear "push-pull" connectors 10
Maximum flow rate per spool valve 100 l/min ± 10
1. Introduction
1-26 MF 6700 S series tractors
ACT0025630
To Next Page
Loading...
