Engine
Model
MF 6713 S MF 6714 S MF 6715 S MF 6716 S MF 6718 S
Recommended oil: API-CJ4 or ACEA-E9
Maximum operating tilt
(precautions)
25° pitch
20° roll
Oil/fuel consumption Maximum 0.2%
Lubrication system Gear pump
Oil cooling system Oil/water heat exchanger
Oil pressure at minimum
speed
1,5 bar
Oil pressure at maximum
speed
2,5 bar at 5 bar depending on the temperature
Relief valve adjustment
pressure
5 bar (spring pressure)
Air suction type Turbocharged with air/air intercooler
Air preheating type Grid heater with relay controlled by the ECU
Number of valves 16
Valve clearance value 0,35 mm (inlet and exhaust)
Engine cooling system Coolant
Fan type Viscostatic
Thermostat begins to open
at
83 °C
Coolant temperature -36 °C to +106 °C
Air compressor brand for the
brake system
Knorr Bremse
Type of compressor Piston
Pressure range: 6,5 bar to 8 bar
Block preheater 110 or 220 volts
Fuel preheater Optional
Urea preheater Tank: coolant
Exhaust fumes recirculation
system
Pump module and supply lines: electric
DOC + SCR system (DEF or
AdBlue
™
injection)
DOC with metal substrate (exhaust fumes oxidation catalyzer)
SCR Technology with 1 ceramic substrate (exhaust fumes treatment)
Safety system NOx sensors at exhaust inlet and outlet
Device brand Bosch Denox 2.2+
1. Introduction
1-14 MF 6700 S series tractors
ACT0025630
To Next Page
Loading...
