3.12.2 Description of hydraulic couplers on Closed Center system (Load Sensing) ..... 173
3.12.3 Use of hydraulic couplers on Closed Center system (Load Sensing) ...........175
3.12.4 Description of the hydraulic controls inside the cab ...................... 179
3.12.5 Hydraulics control lever ...........................................180
3.12.6 Setting flow rates ...............................................181
3.13 Front-end loader function ......................................... 182
3.13.1 Front-end loader ................................................182
3.13.2 Layout of components ........................................... 182
3.13.3 Using the mechanical joystick of the front-end loader .....................183
3.13.3.1 Joystick in working position ................................. 183
3.13.3.2 Joystick in rest position .................................... 184
3.13.3.3 Joystick functions for the front-end loader .......................184
3.13.3.4 Electrical functions for the front-end loader ......................184
3.13.3.5 Floating position ......................................... 185
3.13.3.6 3rd and 4th functions ......................................185
3.13.3.7 Arm suspension ......................................... 186
3.13.3.8 Locking and unlocking accessories ............................186
3.14 Lighting ..........................................................187
3.14.1 Main lighting control module .......................................187
3.14.2 Work lights module ............................................. 188
3.15 Suspended cab ...................................................190
3.15.1 Suspended cab ................................................ 190
3.16 Front tires and track widths ....................................... 193
3.16.1 Wheel studs ...................................................193
3.16.2 Installation points of the axle stands ................................. 193
3.16.3 Adjusting the front wheel track width ................................ 194
3.16.4 Adjusting the 4WD front axle stops ..................................197
3.16.4.1 Fitting the oscillation stops ..................................197
3.16.4.2 Adjusting the steering angle .................................197
3.16.4.3 Toe-in check ............................................ 198
3.16.4.4 Adjusting the front fenders Adjusting the lateral position of the fender
on the support (two adjustments are possible) .......................... 198
3.16.5 Tires ........................................................ 199
3.16.6 Tire pressures ................................................. 199
3.17 Rear tires and track widths ........................................200
3.17.1 Wheel studs ...................................................200
3.17.2 Installation points of the axle stands ................................. 200
3.17.3 Rear track width with flanged shafts ................................. 201
3.17.4 Rear track width with short straight shafts .............................203
3.17.5 Rear track width with long straight shafts ............................. 208
3.17.6 Adjusting the rear wheel track width ................................. 213
3.17.6.1 Adjustment of wheel position on the straight shaft ................ 213
3.17.6.2 Adjustment of wheel position on the straight shaft ................ 213
3.18 Dual wheels ......................................................215
3.18.1 Dual wheels ...................................................215
3.18.2 Installation points of the axle stands ................................. 216
3.18.3 Dual rear wheel track width with short straight shafts .....................217
3.18.4 Dual rear wheel track width with long straight shafts ..................... 227
3.19 Ballast ........................................................... 241
3.19.1 Liquid ballasting ................................................ 241
3.19.2 Front-end weight ............................................... 241
Table of contents
MF 7700 - Operation
ACT0020750
Find manuals at https://best-manuals.com
To Next Page
Loading...
