11. RIDING
WARNING
You must inspect you ATV each time before riding to ensure it is
in proper working order. If proper inspection is not done, severe
injury or death could result.
See“4.DAILY PRE-RIDE INSPECTION”
1. Sit upright with both feet on footrests and both hands on the
handlebar.
2. Starting the engine and allowing it to warm up,
3. Check you surroundings and determine your path of travel.
4. Release the parking brake.
5. Slowly depress the throttle with you right thumb and begin
driving .Vehicle speed is controlled by the amount of throttle
opening.
6. Drive slowly, practice maneuvering and using the throttle and
brakes on level surfaces
To Next Page
Loading...
