13. BATTERY
1. Set the battery in the battery box.
2. First connect and tighten the red (positive) cable.
3. Second connect and tighten the black (negative) cable.
4. Verify that cables are properly routed.
NOTE:
l When you ATV is placed in storage for one months or more,
the battery should be removed, charged to proper level, and
stored in a cool dry place.
l Before reusing, take the battery to your dealer for testing and
recharging.
l When installing a new battery, make certain it is fully charged
prior to it is initial use. Using a new battery that has not been fully
charged can damage the battery resulting in a shorter life of the
battery.
CAUTION
Your ATV is equipped with a 9Ah Battery. This may no be
sufficient to provide power for optional equipment. When
installing optional equipment please upgrade your battery as
necessary. See your dealer for the proper battery.
To Next Page
Loading...
