Master Audio
Joker Series (Passive). Version 1.4 Jan14 14
JK26 JK10 JK12 JK15
Horizontal flying
2&5 or 3&6 or 9&10 or 11&12 (front rigging points)
1&4 or 7&8 (back tilt points)
Vertical Flying
2&3 or 5&6 or 9&11 or 10&12 (front rigging points)
1 or 4 or 7 or 8 (back tilt points)
We offer as optional accessory the ACR M8 eyebolt.
3.7.3. JK26, JK10, JK12 and JK15 flying with SP35 wall stand
These models may be wall mounted by the SP35 wall stand accessory.
Fig.20. SP35 wall stand
Mounting:
1- Hold the wall stand against the mounting surface, so you can mark the locations of
the mounting holes
2- Drill corresponding pilot holes on the wall and attach the bracket with screws
3- Set the cabinet on the 35mm pole
4- Adjust the cabinet for desired angle
3.7.4. JK26, JK10, JK12 and JK15 vertical flying with “HR” bar
Use HR26 flying bar for JK26
Use HR10 flying bar for JK10
Use HR1215 flying bar for JK12
Use HR1215 flying bar for JK15
To Next Page
Loading...
