Should you accidentally allow the kettle to operate without water, the boil-dry protection will
automatically switch it o. If this should occur, allow the kettle to cool before filling with cold
water and re-boiling.
Mineral deposits in tap water may cause the kettle interior to discolour. To remove this
build-up, use non-toxic Liquid Descaler.
Alternatively:
1. Fill the kettle with 3 cups of white vinegar and the remainder with water to the MAX level
and allow to stand overnight. Do not boil.
2. Empty the solution from the kettle. Any stains remaining inside the spout can be
removed by rubbing with a damp cloth. Fill the kettle with clean water, bring to boil and
then discard the water. Repeat and the kettle will be ready to use.
Always disconnect the appliance from the power outlet and leave it to cool down completely before
cleaning.
Never immerse the kettle or cord in any liquid, or allow moisture to contact with these parts.
Wipe the external housing with a damp cloth or cleaner.
Model no. 043-2743-8 | Contact us: 1-855-803-9313
76
TM
BOIL-DRY PROTECTION
CLEANING YOUR CORDLESS KETTLE
STORAGE REMOVAL OF MINERAL DEPOSITS
CAUTION: Do not use chemical, steel, or abrasive cleaners to clean the
REMOVAL OF MINERAL DEPOSITS
CLEANING EXTERNAL HOUSING
CLEANING YOUR CORDLESS KETTLE
BOIL-DRY PROTECTION
outside of the kettle.
Cleaning the filter
Remember to clean the filter with a damp cloth after several uses.
When not in use or storage, the power cord may be wound around the cord storage
under the base of kettle.
STORAGE
To Next Page
Loading...
Need help?
General
