Master Lock P008EML - Getting Started; Install Batteries; Set Primary User Code; Set Secondary User Code

2
English
OPEN
OPEN
Getting Started
Installing Batteries in Your Safe
Programming Your Primary User Code
Note: User code must be 1-8 digits in length using numbers 0-9.
Programming Your Secondary User Code
Note: User code must be 1-8 digits in length using numbers 0-9.
Press red button on the
inside of the lid
Press red button on the
inside of the lid
Press
Light turns orange
Light turns orange
Light fl ashes orange
Light fl ashes orange
Beeps 2 times
Beeps 3 times
Beeps 2 times
Beeps 2 times
twice
Enter your chosen user
code and then the # key
Enter your chosen user
code and then the # key
1
1
2
2
2
21
3
4 AA Alkaline Batteries
173
OPEN
OPEN
3
1