To Next PageTo Next Page
Need help?Do you have a question about the Master Therm BoxAir and is the answer not in the manual?
General| Brand | Master Therm |
|---|---|
| Model | BoxAir |
| Category | Heat Pump |
| Language | English |
Details on suitable indoor environments and required space around the unit for optimal operation.
Guidelines for the mechanical setup of the heat pump unit, including wall mounting and leg installation.
Specifies the required minimum volume of the installation room based on refrigerant charge for safety.
Instructions for placing the outdoor unit considering airflow, condensate drain, and noise impact.
Describes different installation variants for outer units, including wall bracket and leg-mounted options.
Specific mechanical installation requirements for BoxAir packaged air source heat pumps.
Requirements for piping materials, dimensions, and general installation practices for heat pumps.
Procedures for welding refrigerant lines, performing leak tests, and vacuuming the system.
Steps for connecting circuits and applying thermal insulation to piping for efficiency.
Explains the operation of earth exchangers and guidelines for collector piping.
Instructions for installing ground loops and connecting them to the heat pump system.
Details on horizontal (standard, SLINKY) and vertical ground loop configurations.
Information on manifold placement, connection, and the overall hydraulic system.
Covers piping connection, pressure testing, heat insulation, and anti-freeze mixture.
Guidelines on water quality, corrosion inhibitors, and system connection warnings.
Connection schemes for various heat pump units like AQ, AM MINI/EM.
Details various methods for preparing Domestic Hot Water (DHW) using heat pumps.
Connection information for BoxAir, ASW units and descriptions of heating circuits.
Specifies requirements for the main power supply, including protection and circuit breakers.
Guides on electrical interconnection between indoor/outdoor units and external components.
Details on standard and optional control units, and probe connections.
Information on wiring and connecting mixing valve servos and circulating pumps.
Checklists for mechanical installation and piping network inspection before commissioning.
Procedures for checking electrical wiring and performing start-up operations.
Defines required qualifications for maintenance and outlines general tasks.
Details specific maintenance procedures for quarterly and annual checks.
Specifies conditions and limitations of the manufacturer's warranty.
Highlights the importance of adhering to national and European standards and regulations.
Provides a history of changes and updates made to the manual.
