www.masterwater.comMade in USA
Master Water’s Satin Series softens water while protecting
appliances and fixtures from hard water mineral deposits.
Needing less water to drain, these efficient water softeners
reduce scale while improving flow in pipes, require low salt
usage and are capable of high capacity with a small footprint.
APPLICATION GUIDE
Highly efficient water conditioning
Satin Series
Our systems are available in the
following configurations:
• MP (Single Tank) Standard high efficiency model
• RS (Twin Alternating) 24/7 treated water, treated
water regeneration, no wasted capacity
• MP2 (Parallel Units) 24/7 treated water, treated
water regeneration, twice the flow
Options available on all configurations:
• Brine Recovery
• Separate Source Regeneration
• Feed Pump Operation
Water Issue: Hardness, Iron/Manganese, Lead, Copper, Radium
1
Model Number Gallons to Drain
MP-MCA-30T 41.64 Gallons
MP-MCA-45T 45.6 Gallons
MP-MCA-60T 59.56 Gallons
Model Number Rated Flow Rate
MP-MCA-30T 16.8 GPM
MP-MCA-45T 15.5 GPM
MP-MCA-60T 17.3 GPM
Model Number Capacity @ 4322 grains
MP-MCA-30T 19,400 gr @ 4.5 lbs
MP-MCA-45T 29,200 gr @ 6.75 lbs
MP-MCA-60T 38,900 gr @ 9 lbs
LESS WATER TO DRAIN
HIGHER SERVICE FLOW
HIGHER EFFICIENCY
Product Versions Mineral Tank Size Brine Tank Size Backwash Flow Service Flow
MP-MCA-30T 10” x 40” 18” x 33” 1.7 16.8
MP-MCA-45T 10” x 54” 18” x 40” 1.7 15.5
MP-MCA-60T 12” x 48” 18” x 40” 2.7 17.3
RS-MCA-30T 10” x 40” 18” x 33” 1.7 16.8
RS-MCA-45T 10” x 54” 18” x 40” 1.7 15.5
RS-MCA-60T 12” x 48” 18” x 40” 2.7 17.3
MP2-MCA-30T 10” x 40” 18” x 33” 1.7 33.6
MP2-MCA-45T 10” x 54” 18” x 40” 1.7 31.0
MP2-MCA-60T 12” x 48” 18” x 40” 2.7 34.6
1
Water Softeners are certified for hardness removal only.
Product tested and certified by WQA to
meet the requirement of NSF/ANSI 44
MP DUPLEX
To Next Page
Need help?
General
