Shipping Carton Description / unit:
Contents Description
Distributor pipe installed
Logix control
263/742 timer and backwash flow
control and bypass with 1” copper or
Note: all units have a Vortech distributor and do not require
gravel.
System Description:
The multi media filter tank has a Logix top mounted automatic
control valve with an electronic time clock to initiate regeneration.
The Logix Valve is constructed of non-corrosive Noryl material and
is rated at a maximum working water pressure of 100 psi. It uses a
742 microprocessor based timer to actuate regeneration in the
following ways:
a. Manual regeneration button to start an emergency
regeneration
b. Regeneration day setting
NOTE: THIS FILTER IS NOT INTENDED TO BE USED FOR TREATING WATER THAT
IS MICROBIOLOGICALLY UNSAFE OR OF UNKNOWN QUALITY WITHOUT
ADEQUATE DISINFECTION WHETHER BEFORE OR AFTER THE SYSTEM.
Multi Media Filter Positioning:
1. Place Multi Media Filter in desired position, far enough from walls
and other obstructions to allow for servicing the unit.
2. Place the Multi Media Filter within reasonable access to a
grounded 115V/60 HZ circuit and a legal drain line connection.
To Next Page