Master Ribs 5 - Assembly Instructions; Step 1: Connect the vertical bars; Step 2: Install the horizontal bars; Step 3:Assemble the bars

50 pages

To Next Page

To Previous Page

Assembly Instructions

Step1: Connect the vertical bars #18(2pcs), #19(2pcs), with screws #4(2pcs) , washers #7(4pcs), nuts #3(2pcs).

Tighten the screws.

Step 2: Install the horizontal bars #20(8pcs) to the vertical bars, with screws #6(16pcs), washers #7(16pcs).

DO NOT tighten screws (from step2 to step4).

Step 3:Assemble the bars #15(2pcs), #16(2pcs), with T shape metal plate #17(4pcs), screws #6(10pcs),