Integrity Bath MB-80 Operating Instructions
______________________________________________________________________________________________
MB-80 Operations 2/18/13 800.798.5867
BathAire
(SM)
Purge Cycle:
BathAire will automatically turn on after the bath
has been idle for twenty (20) minutes and run for
one (1) minute. This allows the area around the
aerators to completely dry.
Other Considerations:
When not being used storage areas should be
locked; 4 keys are provided with the system.
It is recommended that a two person bathing team
be established for each shift with trained backups.
Using the team approach, with one member
transferring the individuals to and from the bathing
area and the other operating the bathing system
increases the efficiency of the bathing operations.
It is recommended that the operations wall chart be
posted on the wall next to the control end of the tub
for quick reference by the operator of the Integrity
Bath system.
To Next Page
Loading...
