MasterCraft 054-7121-2 User Manual

20V max* LITHIUM-ION CORDLESS ANGLE GRINDER- 054-7121-220V max* LITHIUM-ION CORDLESS ANGLE GRINDER- 054-7121-2
7 8
 
 Incorrectly sized accessories cannot be adequately guarded or
controlled.
 
 Accessories with arbor holes that do not match the mounting hardware of the
power tool will run out of balance, vibrate excessively and may cause loss of control.
 



 Damaged accessories will
normally break apart during this test time.
 



The dust mask or respirator must be capable of filtrating particles generated by your operation.
Prolonged exposure to high intensity noise may cause hearing loss.
 
 Fragments of workpiece or of a broken accessory
may fly away and cause injury beyond the immediate area of operation.
 
 A
cutting accessory contacting a “live” wire may make exposed metal parts of the powertool "live" and
could give the operator an electric shock.
  The
spinning accessory may grab the surface and pull the power tool out of your control.
  Accidental contact with the spinning
accessory could snag your clothing, pulling the accessory into your body.
  The motor’s fan will draw the dust inside the housing
and excessive accumulation of powdered metal may cause electrical hazards.
  Sparks could ignite these materials.
  Using water or other liquid coolants may
result in electrocution or shock.
SAFETY GUIDELINES
Battery tool use and care
  A charger that is suitable for
one type of battery pack may create a risk of fire when used with another battery pack.
  Use of any other battery
packs may create a risk of injury and fire.
 

 Shorting the battery terminals together may cause burns or a fire.
 

 Liquid ejected from the battery may cause irritation or burns.
Service
 
This will ensure that the safety of the power tool is maintained
Safety guidelines for angle grinder
 

  
  
 
 
 Failure to follow
all instructions listed below may result in electric shock, fire and/or serious injury.
 
Operations for which the power tool was not designed
may create a hazard and cause personal injury.
 
Just because the accessory can be attached to your power tool, safe operation is
not assured.
 
 Accessories running faster than their RATED SPEED can break and fly apart.
SAFETY GUIDELINES

MasterCraft 054-7121-2 Specifications

General

Brand	MasterCraft
Model	054-7121-2
Category	Grinder
Language	English