MasterCraft 2009 MariStar X-Series - Quarterly (Every Fifty [50] Hours); Lubricate the Engine Starter Gear and Shaft; Annually (Every One Hundred [100] Hours); Annual Maintenance

Quarterly (Every Fifty [50] Hours)
Note: MasterCra recommends that the following functions be
performed by authorized MasterCra technicians at an autho-
rized MasterCra dealer.
Before the engine has been started or aer it has cooled:
• Lubricate the engine starter gear and sha.
• Check the safety equipment.
Annually (Every One
Hundred [100] Hours)
Note: MasterCra recommends that the
following be performed by authorized
MasterCra technicians at an autho-
rized MasterCra dealer.
Before the engine has been started or aer
it has cooled:
• Replace the fuel lter (to be per-
formed by an authorized MasterCra
technician only).
• Check the propeller sha coupler
alignment.
• Lubricate the steering system.
• Lubricate the throttle and shi cables.
• Check the engine mounts.
• Inspect the complete fuel system for
leakage.
• Check the re extinguisher and sup-
pression units on-board.
Details follow in the next few sections.
MasterCra recommends that many of
these functions be performed by authorized
MasterCra technicians at an authorized
MasterCra dealer!
MasterCraft 2009 Owner’s Manual - Page 15-2