Service Information
• Dealer Information contains the contact information for the
seller of your craft.
• Dealer Service Reset displays a question of “Reset Dealer
Service?” with answers of Yes or No. Selecting Yes will reset
the timer for the next service due.
• PDM Diagnostics is discussed in detail on the next page.
• Update Software provides a method of displaying the
current software and available versions to install.
Factory Settings
Factory Settings requires a password to enter. If changes are
desired for the Factory Settings, please contact your dealer.
PDM Diagnostics
The PDM Diagnostics pages will display circuit and
fault information for various outputs, inputs and CAN
Communications on the craft.
Touch each tab of PDM1, PDM2, PDM3 and PDM4 at the top
to review the various circuits being monitored.
If an issue arises on the craft, review this page to see if one of
the fault conditions exists for that component. To reset a fault,
check the breakers and cycle the battery switch.
To Next Page
Loading...
