EasyManua.ls Logo

MasterCraft Aviara AV32

MasterCraft Aviara AV32
285 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Never operate the Joystick or engines while people are swimming.
Joystick operation will engage the propellers, causing serious injury
or death to swimmers.
Trim Tab Control
Models
All
Purpose
Trim tabs are used to level the boat when operating with an
unbalanced load in the boat.
Location
Trim Tab control buttons are located forward of the throttle.
Operation
When operating at planing speeds and the boat is rolling in
either the port or starboard direction, use trim tabs to bring the
boat back to a level driving position. The operation of all Lenco
switches is based on the position of the bow. To lower the
starboard bow, press the right (starboard) side of the switch
where it reads DOWN. This lowers the port tab. To lower the
port bow, press the left (port) side of the switch where it reads
DOWN. This lowers the starboard tab.
Never dock or trailer your boat with trim tabs in the down position.
Doing so could cause damage to the tabs or the hull which is not
covered under warranty.

Related product manuals