To deactivate the system, follow the above steps in
reverse order.
Specifications
Each Aviara model uses a different shore power cable. See
the specifications below to ensure that your dock is properly
equipped:
• The AV36 features a twin 30 A, 125 V connection.
• The AV40 features a single 50 A, 125/250 V connection.
Generator and
Inverter
Purpose
The generator or inverter provides power to the electronics of
the boat.
Operation
For operating instructions see the independent generator or
inverter manuals included in the owner’s package with the boat.
Shore Power
Models
Optional on the AV36, standard on the AV40.
Purpose
Shore power cables provide AC power to the boat when docked,
and are able to re-charge the battery system.
Location
The shore power connections are located near the battery
switches in the port-side aft storage tray under the sunpad.
Operation
To power the boat with a shore power connection:
1. Use the cable provided and plug female end into the boat.
2. Plug the male end into the power-station at the dock.
3. Turn ON the breaker at the dock (where equipped).
4. Turn ON the MAIN BREAKER on the SHORE INLET PANEL in
the boat.
5. To activate cabin power, turn ON the SHORE POWER
BREAKER at the MAIN DISTRIBUTION PANEL in the cabin.
6. Energize individual systems on the MAIN DISTRIBUTION
PANEL as necessary.
To Next Page
Loading...
