7. To save the profile to be used at a later time, touch Save & Close.
To save and activate it immediately, touch Save & Activate. A
screen showing “Activated” will appear, then the home screen will
show the newly created profile as active.
8. The newly created profile may be changed and saved from the
home screen as well. With the profile active, change the Ballast,
Tabs and/or set speed and touch .
Wakeboard Mode
MasterCraft created three wakeboard profiles for dierent ability
levels and recommends using the profile that most closely
corresponds to your riding level:
• Beginner - Designed for new riders learning to wakeboard for
the first time. Allows riders to get comfortable on a wakeboard
at slower speeds, and begin to learn surface tricks and wake
crossings. Recommended line length - 55-60’
• Intermediate - Designed for riders learning their first wake-to-
wake jumps and learning basic inverts and spins. Recommended
line length - 55-65’
• Advanced - Designed for riders seeking bigger airs for advanced
tricks. Recommended line length - 65-75’
All three profiles are selectable from the Wake home screen. To
activate a profile, tap the profile you wish to use. The profile will turn
light gray to show that it is active.
2021MCOwnerManualFINAL.indd 91 8/26/20 1:51 PM
To Next Page
Loading...
Need help?
General
