2023 OWNER’S MANUAL
/
194
User Settings
From the Main Menu screen, highlight the User Settings feature
and press the Display Key under SELECT to open the User Setting
screen.
The User Settings allow you to customize display features. To
navigate to a feature, press the Display Key under your desired
feature or action. Use the UP and DOWN pointers to scroll the
list and highlight a feature. Use the PLUS and MINUS to change
value or to select. Press the HOME key to go back; press it again to
return to Home.
Units - US Standard (US Std) or Metric
Fuel Alarm - Sets the percent of fuel left in tank to deploy the alarm.
Choices are 1% - 50%.
Min Depth Alarm - The choices are OFF or from 1 ft. to 98.5 ft.
Fire Extinguisher - The choices are Enable (pop-up notification) or
Disable (pop-up notification).
Factory Reset - This choice restores all factory settings to their
original values. Choices are: YES or NO.
Day Brightness - Sets the screen brightness for daylight. Settings
are: 1%, 2%, 3%, 4%, 5% and 10-100% in increments of 10%.
Night Brightness - Sets the screen brightness for nighttime.
Settings are: 1%, 2%, 3%, 4%, 5% and 10-100% in increments of 10%.
Gauge Brightness - Day - Sets the gauge brightness for daylight.
Settings are: 10- 100% in increments of 10%.
Gauge Brightness - Night. - Sets the gauge brightness for
nighttime. Settings are: 10-100% in increments of 10%.
The display uses Night Brightness and Gauge Brightness Night
when the Nav Light input is switched ON.
To Next Page
Loading...
Need help?
General
