2023 OWNER’S MANUAL
/
330
Afer Operation
• Check for fluid leaks.
• In boats equipped with a ballast system, drain water from the
ballast system before placing the boat on the trailer. Note
that the engine must be running at least 1500 RPM during the
pumping process (for both fill and empty operations). Drain
water prior to ceasing operation of the boat and loading on the
trailer. More information regarding ballast systems appears
in various sections of this Owner’s Manual, but pay particular
attention to the information in the Boat Operation section of this
Owner’s Manual
• Check the fins (where equipped), propeller, rudder and shaft for
damage after removing the boat from the water.
To Next Page
Loading...
Need help?
General
