2023 OWNER’S MANUAL
/
32
BOAT SAFETY LABELS
Warning labels are placed on your MasterCraft boat at the time
of manufacture to alert operators to potential hazards that may
not be obvious. These labels also indicate how to avoid hazards.
Warning labels should never be removed and must remain legible.
If you suspect a label is missing, or if a label becomes damaged
or becomes unreadable (damaged, faded, or sun bleached), you
should have it replaced immediately.
To replace a warning label, contact your
MasterCraft dealer with a label part number,
which can be found by visiting MasterCraft.
com/manuals, and request a new label.
The label’s part number is located in the
bottom right corner of every label (shown
circled in green on the label to the right).
It is the responsibility of the boat owner and
occupants of the boat to understand and
comply with all warning labels and safety recommendations
and requirements. The operator of the boat and the boat owner
are responsible for the proper operation of the boat and the safety
of the occupants of the boat. Failure to adhere to and comply with
the on-product warning labels and safety statements labeled
as dangers, warnings, and cautions that appear in this manual
can lead to serious injury, or death, as well as property damage.
READ AND ADHERE TO ALL WARNING PLATES AND LABELS from
bow to stern, including those that are installed inside the engine
compartment, lockers, and underneath seating.
To Next Page
Loading...
Need help?
General
