2023 OWNER’S MANUAL
/
398
Seven-Wire Connector
The tow vehicle must have a seven-wire connector in order for disc
brakes and the trailer lights to function properly. It is important to
connect the seven-wire connector on the trailer to the seven-wire
connector on the tow vehicle. MasterCraft recommends applying
dielectric grease to the terminals inside the 7-pin trailer connector
at least once per year. This helps protect the terminals from
corrosion, which is inherent to a non-sealed connection.
• Determine the combined weight of the boat and all contents
of the boat being loaded onto the trailer. The boat’s weight is
listed in the guide to individual models section of this owner’s
manual. (The total weight of the boat and contents may not
safely exceed the available cargo load capacity listed on the
trailer tongue).
Load Limit
The correct method for determining the load limit is to:
• Locate the Gross Vehicle Weight Rating (GVWR) statement on
the trailer tongue. (The number shown equals the total weight
capacity for the boat and all contents that can be safely loaded
and towed on the trailer.)
To Next Page
Loading...
