459
/
2023 OWNER’S MANUAL
8. Oil filter;
9. Engine oil;
10. Transmission fluid;
11. Engine belts;
12. Antifreeze;
13. Raw water impeller;
14. Ballast impellers;
15. Trailer brake pads and rotors;
16. Trailer tires and wheels;
17. Trailer brake fluid;
18. Trailer bunk carpet;
19. Anodes (on transom, shaft, attitude adjustment plate
and WSD’s);
20. Gaskets, foam and padding; and
21. Trailer bow rollers
4. Commercial Boats, Special Use and Demo Boat Warranty
Conditions, Limitations and Exclusions.
4.1 Commercial Boats
4.1.1 Definition
For purposes of this warranty, a Commercial Boat is defined
as “a boat that is used to generate income of any kind,
whether direct or indirect.” Examples of commercial use
boats include those used in ski schools, ski clubs, ski camps,
rental boats, boat clubs, or resort-use.
4.1.2 Warranty Conditions, Limitations and Exclusions
In addition to the warranty conditions, limitations and
exclusions, set forth in Section 3 of this Limited Warranty, all
of which apply to Commercial Boats, the following additional
warranty limitations apply to Commercial Boats:
a. For a period of ninety (90) days from the In-Service
Date, MasterCraft will provide full warranty coverage in
accordance with the terms and conditions of this Limited
Warranty Statement.
b. Between ninety-one (91) days from the In-Service Date
and the attainment of 500 hours of engine operation there is
no warranty for gel coat, upholstery, cosmetic flaws, or any
other component except components of the boat’s engine
and transmission.
c. After the attainment of 500 hours of engine operation,
any and all warranty coverage under this Limited Warranty
State ment shall expire and be of no further force or eect.
d. Upon sale of the boat to a second owner, all warranty
coverage under this Limited Warranty Statement shall
expire and be of no further force or eect.
4.2 Special Use Boats
4.2.1 Definition
For purposes of this Warranty, a Special Use Boat is defined
as “a boat that is used under consignment, as a photo,
athlete, and/or engineering design validation boat.”
4.2.2 Warranty Conditions, Limitations and Exclusions
In addition to the warranty conditions, limitations and
exclusions, set forth in Section 3 of this Warranty, all of
To Next Page
Loading...
Need help?
General
