BLUETOOTH PROCEDURES
To attach a Bluetooth-connected device, follow these steps:
Step Action
1
Touch the Bluetooth icon
. If the desired
device is not already connected, touch the Bluetooth
Settings button .
2 Previously paired devices will appear on the Devices
list. Touch Add to add a dierent device.
3 The Add New Device screen will appear, asking to put
the mobile device into pairing mode. Touch OK.
4 The display will begin to poll available devices within
the physical area. When the desired device appears
in the list, touch the + beside the name.
5 A “Pairing Device” message will appear on both the
display and device. Touch Pair on the Device and
touch OK on the display.
6 The display will show Connected beside the device
name. Touch Back, and the song title and artist
currently being played will appear:
SWITCHES
Touch the Switches button and the following screen will
appear:
Touch the appropriate button (Bilge, Blower, Lights and Heaters) to
turn them on or o.
Note: Heater and Seat Heater are options enabled by the Dealer and
may not appear on the above screen.
To close the Switches menu, touch the X:
2021MCOwnerManualFINAL.indd 169 8/26/20 1:52 PM
To Next Page
Loading...
Need help?
General
