2021 OWNERS MANUAL / 198
and highlight a feature. Use the PLUS and MINUS to change value
or to select. Press the HOME key to go back; press it again to return
to Home.
Units - US Standard (US Std) or Metric
Fuel Alarm - Sets the percent of fuel left in tank to deploy the alarm.
Choices are 1% - 50%.
Min Depth Alarm - The choices are OFF or from 1 ft. to 98.5 ft.
Fire Extinguisher - The choices are Enable (pop-up notification) or
Disable (pop-up notification).
Factory Reset - This choice restores all factory settings to their
original values. Choices are: YES or NO.
Day Brightness - Sets the screen brightness for daylight. Settings
are: 1%, 2%, 3%, 4%, 5% and 10-100% in increments of 10%.
Night Brightness - Sets the screen brightness for nighttime. Set-
tings are: 1%, 2%, 3%, 4%, 5% and 10-100% in increments of 10%.
Gauge Brightness - Day - Sets the gauge brightness for daylight.
Settings are: 10- 100% in increments of 10%.
Gauge Brightness - Night. - Sets the gauge brightness for night-
time. Settings are: 10-100% in increments of 10%.
The display uses Night Brightness and Gauge Brightness Night
when the Nav Light input is switched ON.
From the Home screen, the Main Menu screen can be accessed by
pressing the Display Key under MENU in the Menu Bar.
Main Menu Screen Features
• User Settings
• Service Information
• Engine Diagnostics
• Factory Settings
Press the Display Key under the UP and DOWN pointers to scroll the
list and highlight a feature. Press the Display Key under SELECT to
open a feature screen. Press the HOME key to return to the Home
screen or press the ARROW key to scroll to other screens.
User Settings
From the Main Menu screen, highlight the User Settings feature and
press the Display Key under SELECT to open the User Setting screen.
The User Settings allow you to customize display features. To
navigate to a feature, press the Display Key under your desired
feature or action. Use the UP and DOWN pointers to scroll the list
2021MCOwnerManualFINAL.indd 198 8/26/20 1:52 PM