MasterCraft ProStar 190 - Page 67

ADD
SAVECURRENTwillcreateariderthatusesallthecurrentboatset-
tings. The boat settings can be ballast levels, trim settings, and speed
settings. The rider name may be edited if desired.
DELETEwillremovethedisplayedrider.
EXPORTwillsavethecurrentridertotheUSBFlashDrive.
LISTwillshowallcurrentridersthathavebeencreatedinthesystem.
IMPORTwilltakeanyexportedlesotheUSBFlashDriveintothe
system. This function will overwrite any riders with the same name.
RESETTODEFAULTwillerasetheRIDERLISTandreplaceitwiththe
factory defaults.
TRIM & BALLAST SCREEN
TheTrimandBallastscreendisplaystabpositionandballasttank
levels. The information is Plug ’n Play; therefore, if a tank or trim sen-
sor is not present, the date will be automatically removed.
DIGITAL DATA SCREEN
MasterCraft 2012 Owners Manual • Guide to Individual Models • Page 2-40