MasterCraft X-5 User Manual

 Afterabriefdelay,thefull-screenvideocontentisdisplayed:
Touch any spot on the screen to bring up user controls along the
bottom of the video screen:
Controller Description
Touch to display the MEDIA screen.
   InClipmode:TouchingTAGinitiatesarecording
or inserts a video tag. In Loop mode: Touching
   TAGsavesthecurrentvideoloop.
Touch to stop recording.
If no icons are touched, the video reverts to the full-screen video.
Please note that some renement of these
gauges was in progress at press time. Therefore,
the video display gauge in your boat may have
some minor variances to what is described in this
manual. MasterCraft strongly encourages you to
review ALL instrumentation with your authorized
MasterCraft dealer prior to operating the boat for
the rst time, and at any time during ownership
of the boat if you are uncertain as to proper and
applicable functionality.
Boats with this video display gauge will have the following gauges
mounted in the instrument panel. Brief descriptions of the functions are
includedhere.Formorein-depthdescriptionofthefunctionality,see
the Performance Controls sectionofthisOwner’sManual.
Speedometer
(Larger numbers are miles per hour; smaller interior numbers are kilometers
per hour.)
Tachometer
(Measurement is in revolutions per minute.)
Multiple Readings
Interior ring: Fuel reading. E is empty, F is full. Top arm provides reading.
Lower left quadrant: Engine oil pressure in pounds per square inch.
Lower right quadrant: Engine temperature in Fahrenheit (default).
MasterCraft 2012 Owners Manual • Guide to Individual Models • Page 2-61

MasterCraft X-5 Specifications

General

Brand	MasterCraft
Model	X-5
Category	Boat
Language	English