2023 OWNER’S MANUAL
/
144
Surf provides additional options for seasoned athletes, such as tab
and ballast control. For more information on Rapid Surf and Custom
Surf operation, refer to the dedicated sections below.
Rapid Surf
Rapid Surf allows you to easily select a wave by adjusting the slider
on the left hand side of the screen. Alternatively, use the arrows
located immediately to the right of the slider. Hitting the “Up”
arrow or raising the slider will create a steeper wave. Hitting the
“Down” arrow or lowering the slider will create a mellower wave.
From the Rapid Surf menu, you may also choose the position of
your surf wave. Selecting SURF RIGHT will create a starboard
wave. Selecting SURF LEFT will create a port-side wave.
Any adjustments made to your surf wave will appear on the
graphic to the right of the adjustment controls. Whenever new
adjustments are made, a readiness timer will indicate the
load time.
In addition to preset profiles, Rapid Surf also supports
custom profiles. For more information on the profile creator, see
the section of this chapter titled “Creating a New Surf Profile.”
Using Rapid Surf to Select a Wave
Rapid Surf is intended to make wave customization a quick and easy
process. In a few simple steps, you can build an amazing surf wave
and hit the water in no time.
1. Before you begin setting up your wave, make sure that Surf Mode is
selected and set to the Rapid Surf menu. When Rapid Surf is active,
you will see a screen resembling this one:
Add Profile
To Next Page
Loading...
