EasyManua.ls Logo

MasterCraft X22 2023

MasterCraft X22 2023
490 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2023 OWNER’S MANUAL
/
160
Component Description
Oil Change
Reset
Displays a question of “Reset Oil Change?” Tap
YES or NO.
Dealer
Service Reset
Displays a question of “Reset Dealer Service?
Tap YES or NO.
Dealer
Information
Provides the Dealer contact information.
FACTORY SETTINGS
This section requires a Dealer code to enter. If changes are
needed, contact your Dealer.
TROUBLESHOOTING GUIDE
Display appears not to work or doesnt come ON:
Check for loose connections at battery and display unit.
Verify battery has a minimum voltage of 10 volts.
Display resets or goes OFF when starting engine:
Check to ensure that display supply wires are connected
properly to battery.
Verify that the battery is charged properly. If the battery is not
charged, use a battery charger to charge the batteries, or run
the engine until battery power has been restored.
Check battery for efficient starter current.
Display has no backlight:
Contact your authorized MasterCraft dealer.
Keypad has no backlight:
Contact your authorized MasterCraft dealer.
SERVICE INFORMATION
From here, dealers can reset the system’s oil change reminders or
dealer service reminders. Dealer contact information can also be
found here.

Related product manuals