2023 OWNER’S MANUAL
/
428
ADDITIONAL TRAILER OPTIONS
The MasterCraft Trailer supports a variety of optional features. The owner may customize
their trailer by selecting any of these options during the initial phase of ordering. If you are
curious about buying and installing one of these optional features after purchase, contact
your authorized MasterCraft dealer in order to find out whether the desired option
is retrofittable.
Tire Pressure Monitoring System (TPMS)
The routine inspection of tire pressure status is essential to maintaining a safe,
road-ready trailer. If your trailer has been outfitted with the Tire Pressure Monitoring
System (TPMS), you can easily and conveniently monitor tire pressure status from the
palm of your hand. The TPMS works by taking data from a sensor on the valve stem and
transmitting that information via Bluetooth. This allows the user to read pressure levels
from their smartphone, eliminating the hassles involved with manual inspection.
Installing the TPMS is a straightforward, intuitive process. The complete TPMS
installation package resides in the boat’s glovebox upon arrival. Retrieve the tire pressure
sensors, attach them to the valve stems, and use the accompanying wrench to tighten as
needed. Once you have installed the sensors, use your smartphone to download the
In-Command TPMS app. Link your phone to the Bluetooth module and scan the QR-code
on the back of the sensor. Selecting
will provide access to additional instructions from
ASA Electronics, LLC, the app’s developer.
To Next Page
Loading...
