2021 OWNERS MANUAL / 408
NOTE: See an authorized MasterCraft dealer if the tow vehicle does
not have the correct trailer harness.
The trailer lights are brighter when the trailer is submerged. A
sensor notifies the system when the trailer ramp is under water, and
the lights will be at their maximum luminance. When the trailer is
removed from the water, the lights will automatically dim. There is
no consumer control for the system.
Keep Trailer Lighting System In Good Working Order:
Be sure the white ground wire is properly connected to the master
cylinder. Replace any parts that are damaged or worn.
A small amount of waterproof grease on the plug contacts and light
bulb bases will help prevent rust and corrosion.
Before every trip, check for burned out or broken bulbs, cracked or
broken light lenses, etc.
Trailer Runway Lights By XKGlow
XKGlow trailer runway lights are available on all MasterCraft Trailer
Models. The lights are used for a number of dierent purposes, but
generally they are designed to beautifully light a boat resting on its
trailer. For operating instructions and troubleshooting the XKGlow
runway lights, see the XKGlow Operating manual included in the
Information Packet with your boat.
2021MCOwnerManualFINAL.indd 408 8/26/20 1:55 PM
To Next Page
Loading...
Need help?
General
