EasyManuals Logo

MasterCraft XT22 User Manual

MasterCraft XT22
466 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #265 background imageLoading...
Page #265 background image
2021 OWNERS MANUAL / 264
While applying some upward/forward pressure on the tower
header, loosen one of the hand knobs.
Repeat for the other side (or a second person can do this simul-
taneously). NOTE: Typically, it is easier to loosen both sides first
compared to completely removing one knob and then loosening
and removing the second. The angled threaded can put the tow-
er/threads in a bind.
Completely unscrew the hand knobs until they are disengaged (a
spring pushes them out).
Fold tower back and rest it on the motor box (or the tower stands
included with the boat to protect upholstery).
If Removing, Follow These Additional Steps:
Pull excess wires out from under the deck.
• Disconnect the light wires.
NOTE: On the tower side, fold the wires up and push up in the tower
tube. On the deck side, fold/loop the wires up and stu back in the
access hole.
Purpose
Towers add a whole new dimension of appealing boating enjoyment.
Because of their versatility. With their high tow points, optional
lighting accents and optional speaker packages, many boat owners
consider towers to be an essential addition to their boat.
Location
Towers are generally located amidships. On each model, a careful
and thorough testing program was conducted by MasterCraft en-
gineers to ensure maximum towing benefit while keeping the boat
properly balanced. This is extremely important and it is why Master-
Craft strongly discourages the addition of after-market towers. Boat
owners are strongly urged to purchase towers and tower acces-
sories only through an authorized MasterCraft dealer. Installation
of any tower that is not specified and installed by MasterCraft may
void the warranty.
Operation
MasterCraft strongly encourages the occupants of the boat to review
the Common Sense Approach and the Safety sections of this Own-
er’s Manual prior to using the boat’s tower and tower equipment.
Raising and Lowering the ProStar Tower
Lowering (And Leaving The Tower Attached):
2021MCOwnerManualFINAL.indd 264 8/26/20 1:53 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MasterCraft XT22 and is the answer not in the manual?

MasterCraft XT22 Specifications

General IconGeneral
Beam102"
EngineIlmor 6.0L MPI
Surf SystemGen 2 Surf System
Draft29"
Seating Capacity14
Engine OptionsIlmor 6.0L MPI, Ilmor 6.2L GDI
TowerZFT4

Related product manuals