Carbon monoxide is emitted from the engine’s exhaust system.
Never run the engine without proper ventilation. Do not run the
engine in a confined space or where fumes may be trapped.
Troubleshooting
If the heater fails to respond when the switch is turned to either of
its ON positions, check on the main circuit breaker panel to ensure
that the circuit has not tripped. If resetting does not correct the
problem or if it continues to trip, take the boat to an authorized
MasterCraft dealer for repair.
SEAT HEATERS
Models
Optional on all models for driver’s seat; certain models for
observer’s seat.
Purpose
The seat heat option allows equipped seats to be warmed to
temperatures above those of the ambient air.
Location
The electrical seat-heat mechanisms are located inside equipped
seats. The seat heat switch can be found in the helm mounted
touchscreen on the dual screen dash. In some models, an optional
observer seat heat switch will also be found in the helm mounted
touchscreen.
Operation
To turn the seat heater(s) on, navigate to the accessories page on the
dash mounted touchscreen. Tap seat heat button to turn the seat ON.
The button will change colors to show that the seat heater is ON. Note
that the seat heater will only operate with the engine is running.
Special Attention
Do not leave open food, sun tan oil, or other materials on the seats
if the seat heat function is ON. Although the heat does not exceed a
temperature at which skin can touch without burning, the additional
heat could cause some types of food or other materials to melt,
causing a stain or damage that is not covered under warranty.
2021MCOwnerManualFINAL.indd 279 8/26/20 1:53 PM
To Next Page
Loading...
Need help?
General
