2021 OWNERS MANUAL / 290
easier.
8. After mounting the metal ring on the tension pole, release the
tension on the pole slowly so that it returns to a vertical position.
To install the aft sunshade:
1. Remove the sunshade and poles from the storage bags.
2. Un-fold and lay out the sunshade with the buckles facing the
tower. Ensure that the material is facing the correct side up.
3. Insert the tension poles into the gunnel mounting points. Ensure
that they are properly seated in the mount.
4. Lay the wide part (with the buckles) of the sunshade over the
forward edge of the bimini.
5. Buckle the straps around the middle support arm of the bimini
on each side, ensuring that the sunshade remains on the top of
the bimini.
6. Move to the forward end of the shade. Stretch the canvas forward
so that the metal rings can be mounted on the tension poles.
7. Mount the metal rings around the tension poles. Pull the tension
pole slightly toward you to make mounting the metal ring is
2021MCOwnerManualFINAL.indd 290 8/26/20 1:53 PM
To Next Page
Loading...
Need help?
General
