2021 OWNERS MANUAL / 366
Step 1
Open the strainer housing mounted to the engine (see photo).
Step 2
Remove the filter and inspect for debris. Manually clean the strainer.
Step 3
Remove anything found inside the sea strainer.
Step 4
Return the strainer to the housing and replace the lid. Tighten the lid
in place.
• Lubricate the throttle and shift cables.
• Check the engine mounts.
• Inspect the complete fuel system for leakage.
• Check the fire extinguisher and suppression units on-board.
• Change impellers.
MasterCraft recommends using an authorized MasterCraft techni-
cians at an authorized MasterCraft dealer for many of these tasks!
SCHEDULED MAINTENANCE
Before Each Use
Prior to Starting the Engine
Review the Safety Checks and Services section of this Owner’s
Manual. There are important functions that must be followed before,
during and after every outing. The Safety Checks and Services
section notes that all drain plugs must be reinstalled prior to
operating the boat. This is critical to prevent taking on water
Inspect Seacock Strainer
Because a clogged seacock strainer puts undue strain on the
engine(s), the strainer should be checked prior to starting the boat.
The seacock strainer is standard on all boats.
2021MCOwnerManualFINAL.indd 366 8/26/20 1:54 PM
To Next Page
Loading...
Need help?
General
