This document is an operator's manual for a Masterforce 60" x 24" Workbench, Model # 211-4314. It provides essential information for the safe and proper assembly, operation, and maintenance of the workbench.

Function Description:

The Masterforce 60" x 24" Workbench is designed to provide a sturdy and reliable work surface for various tasks. It is intended for general use in workshops, garages, or other similar environments where a stable platform is needed for projects, repairs, or assembly work. The workbench features adjustable feet, allowing for leveling on uneven surfaces, and a robust construction to support a significant amount of weight.

Important Technical Specifications:

Dimensions: 60 inches (length) x 24 inches (width).
Model Number: 211-4314.
Weight Capacity: The maximum product weight, including contents, should be no more than 2000 lbs. Exceeding this limit can cause personal injury or product damage.
Components:
- Adjustable Feet (Part # 313068): 4 pieces.
- M6 x 16 mm Hex Bolt (Part # 320327): 42 pieces.
- The manual illustrates the main workbench structure, including the tabletop, legs, and cross braces.

Usage Features:

The manual emphasizes safety during usage. Key usage features and warnings include:

Safety First: Users must read and understand the entire operator's manual before using the product to reduce the risk of injury.
No Standing or Leaning: Do not stand or lean on the worktop. This is a critical safety instruction to prevent accidents and potential damage to the workbench or injury to the user.
No Children: Do not allow children near the unit. This is a standard safety precaution for workshop equipment.
Two-Person Lift: Do not lift the unit by yourself. This indicates the workbench is heavy and requires at least two people for safe lifting and positioning, especially during assembly or relocation.
Stable Surface: The product should be kept on level surfaces. An unstable or tipped product can cause personal injury or product damage.
No Alterations: Do not alter this product in any manner. For example, do not weld external lockbars or attach electrical equipment. Unauthorized alterations can void the warranty and create safety hazards.
Proper Placement: The workbench should be placed on a soft mat for protection during assembly, and the locations of the holes in the diagram should be noted.
Tightening Bolts: All M6 x 16 mm hex bolts should be securely tightened during assembly to ensure stability.
Post Labeling: The two posts labeled "Front Leg" should be attached to the front of the workbench, and the other two posts should be attached to the back.

Assembly Instructions:

The assembly process involves attaching the posts and cross braces.

Attach the Posts:
1. Lay the wood top upside down on a soft mat for protection.
2. Identify the front and back of the wood top.
3. Attach each post to the worktop using four M6 x 16 mm hex bolts. Tighten securely.
4. Ensure "Front Leg" labeled posts are at the front and others at the back.
Attach the Cross Braces:
1. Long Cross Brace (x1): Attach to the top back using four M6 x 16 mm hex bolts.
2. Long Cross Brace (x1): Attach to the top front using four M6 x 16 mm hex bolts.
3. Long Cross Brace (x1): Attach to the middle of the back posts using four M6 x 16 mm hex bolts.
4. Short Cross Braces (x2): Attach one on either end using four M6 x 16 mm hex bolts per cross brace.
5. Tighten all cross brace bolts securely.

Maintenance Features:

Adjustable Feet: Screw the four adjustable feet into the bottom of the posts. This allows for leveling the workbench on uneven surfaces.
Uprighting the Workbench: Once assembled and feet are attached, turn the workbench upright.
Cleaning: Periodically clean the frame and wood top with mild detergent and water. Grease and oil can be removed with most standard cleaning fluids. For safety, use a nonflammable cleaning fluid.
Regular Inspection: The manual implies regular inspection by stating that failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury, suggesting that users should regularly check the workbench for any signs of wear or damage that could compromise its safety or functionality.

Limited Lifetime Warranty:

Masterforce workbenches are warranted to be free from defects in materials and workmanship under normal use for the lifetime that you own the product. If any part of the product is found to be defective during normal use, the defective product or part will be replaced at the discretion of Masterforce. This warranty does not cover products that are damaged through accident, abuse, misuse, commercial/industrial applications, or neglect. It also does not cover any losses, injuries, or costs including indirect, incidental, or consequential damages. The warranty may not be transferred or sold. To request warranty service, users must have the model number, cash register receipt, and the date of purchase available. If the product is defective, Masterforce will replace the defective part at no cost. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply. This warranty gives specific legal rights, and users may have other rights which vary from state to state. For questions or comments, technical assistance, or repair parts, customers can call 1-800-459-4409 (M-F, 8am-4:30pm, CST).

Safety Symbols and Instructions:

The manual uses various safety symbols to attract attention to possible dangers.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It also indicates that failure to obey safety warnings MAY result in personal injury to yourself or others or property damage.
WARNING: Indicates a potentially hazardous situation which, if not avoided, CAN result in death or serious injury to yourself or to others. It also indicates that failure to obey safety warnings CAN result in death or serious injury.
DANGER: Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury to yourself or to others. It also indicates that failure to obey safety warnings WILL result in death or serious personal injury.
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION. May be used in conjunction with other symbols or pictographs.

Users are instructed to read and follow all safety and assembly instructions before using the product for the first time and to fill in the following information and retain the manual for future reference: Model #, Place of purchase, Date of purchase, and Receipt # of purchase.

MasterForce 211-4314 - Page 12

Table of Contents