MasterForce HV-20SS-DC-MF - How To Adjust Tilt; Speed Control; Wall Fan Installation; Cleaning Instructions

3
WARNING:
 Mountfanonawoodenwallonly.
 Toreducetheriskofelectricshockandpersonalinjury,
ensurethelocationforallmountingisabletosupportthisfan.
 Totalweightoffanis14.5lbs(6.5kg).
 Thisfanisrecommendedtobemountedbyaqualified
electrician.
CLEANINGINSTRUCTIONS
WARNING: 
Unplugfromelectricalsupplysourcebeforecleaning.Afterservicing,anysafetydevice(includinggrillesand
blades)mustbereinstalledorremountedaspreviouslyinstalled: 
 Usesoftdampclothtoclean.Thenwipewithdrycloth.
 Donotuseharmfulcleaners.
 Donotbendtheblades.
 Themotorbearingsarepermanentlysealedanddonotrequireadditionallubrication.
SPEEDCONTROL

RotateSwitchKnobfromLOWtoHI
GH speedsfo
rrespective
air
velocity.
Spe
edcontrolisvariablespeedregulation. 
Itisnormalforthemotortofeelwarmtotouchaftercontinuousoperation.
TOINSTALLASWALLFAN
 Securethehookthroughthetwoholesinthe
hookwithscrews(minimumsize:5/16‐18UNC)tothewall.
 Securethefanonthehook.
WARNING:
 Mountfanonawoodenwallonly.
 Toreducetheriskofelectricshockandpersonalinjury,
ensurethelocationforallmountingisabletosupportthisfan.
 Totalweightoffanis17.6lbs(8kg).
 Thisfanisrecommendedtobemountedbyaqualifiedelectrician.
HowToAdjustTilt
1. Looseknobbyturningcounter‐clockwise.
2. Adjustfanheadtotileyouwant.
3. Tightenedtheknobbyturningclockwise.
KNOB