To Next PageTo Next PageWhy does my Masterlock Safe beep 5 times and show a yellow light?
If your Masterlock Safe beeps 5 times and a yellow LED light appears after entering your code, it means you have entered an invalid code. Wait one minute before retrying your code. Alternatively, you can open the safe with the override key.
What to do if my Masterlock Safe digital lock is unresponsive?
If the digital lock on your Masterlock Safe is unresponsive when you try to enter your code, the battery power is likely low. Install four new AA size alkaline batteries. You can also open the safe using the override key.
How to fix a red LED light on a Masterlock Safe?
A red LED light on your Masterlock Safe indicates that the battery power is low. To resolve this, install four new AA size alkaline batteries. You can also open the safe with the override key.
Instructions for opening the safe using the override key, especially for initial access or emergencies.
Guide for correctly installing AA alkaline batteries and notes on battery usage and types.
Steps to reprogram the safe with a new user code for enhanced security.
Procedure for unlocking the safe using either the factory or a programmed user code.
Instructions on how to properly lock the safe after use to secure its contents.
Recommended steps for bolting down the safe to a floor or wall for maximum security.
Identifies common problems like LED indicators and unresponsive locks, with solutions.
General| Brand | Masterlock |
|---|---|
| Model | SentrySafe X105P |
| Category | Safes |
| Language | English |
